Course:
TA-TCI Project Setup

SAP LSO Course Code:
78TECH400401

Course can be found when searching
"By Topic" under these categories:

Construction Inspection

Description:
This is a self study course that will provide an overview of the procedures used to setup a new field office for a PennDOT project. This course is part of a series of TA-TCI self study modules intended for new inspectors with 0-1 year of experience on a PennDOT project.

Learning Objectives include:
-Review the purpose of the field office.
-Present the source and purpose of the job box.
-Identify the process used to establish the filing system based on the job box contents.
-List the minimum documentation required for a field office to operate.
-Explain the procedure used to obtain missing documents during setup.

In order to receive credit for completion of the module, the participant must pass a final quiz built into the module and follow the instructions to submit their results to PennDOT. By agreeing to complete the course, the participant is self-certifying that they are the individual completing the modules, and they are not completing the modules on behalf of another individual.

Length of Recording: 15:04 minutes

Link to this Training:
Click here to run the "TA-TCI Project Setup" eTraining.

Continuing Education Credits

Awarding continuing education credits (PDH/CEU/CEH) to a training course or other training event does not imply or guarantee that the training course/event is approved by the Pennsylvania State Registration Board of Professional Engineers, Geologists and Land Surveyors. According to Pennsylvania Act 25, “Credit determination for activities…shall be the responsibility of the licensee. Continuing professional competency obtained by a licensee should maintain, improve or expand skills or knowledge obtained prior to initial licensure, including law and ethics applicable to the profession, or develop new and relevant skills and knowledge.”
For informational purposes only:	1 CEU is equal to 10 hours of instruction
	1 CEH is equal to 1 hour of instruction

Contact Information

Name:	Jonie (Buggy) Gerasinovich
Phone:	(717) 409-3993
Email:	ra-pdhighadmintrain@pa.gov

Created	Last Modified
By Judy Bortz/PennDOT On 02/12/12 At 03:06 PM	By Abigail Hoffer/PennDOT On 09/15/25 At 03:13 PM

Course:	TA-TCI Project Setup
SAP LSO Course Code:	78TECH400401


Description:	This is a self study course that will provide an overview of the procedures used to setup a new field office for a PennDOT project. This course is part of a series of TA-TCI self study modules intended for new inspectors with 0-1 year of experience on a PennDOT project. Learning Objectives include: -Review the purpose of the field office. -Present the source and purpose of the job box. -Identify the process used to establish the filing system based on the job box contents. -List the minimum documentation required for a field office to operate. -Explain the procedure used to obtain missing documents during setup. In order to receive credit for completion of the module, the participant must pass a final quiz built into the module and follow the instructions to submit their results to PennDOT. By agreeing to complete the course, the participant is self-certifying that they are the individual completing the modules, and they are not completing the modules on behalf of another individual. Length of Recording: 15:04 minutes
Link to this Training:	Click here to run the "TA-TCI Project Setup" eTraining.